UNINTERRUPTED PHOTOVOLTAIC SOLAR POWER ALL-DAY, ALL-NIGHT
There’s a lot more to solar power than what is marketed to the masses. We want to share ALL the secrets of unlocking the Sun’s power with you.
NOW you can generate your own electricity for self-consumption and go Off-Grid to become completely energy independent, anytime, anywhere.
Reducing your electricity bill is simply not good enough for us at PLUTO 4, we want it to drop to ZERO.
In an ideal situation, these are the systems and products you’ll need to drastically cut down power consumption from the main the grid and eventually go FULLY Off-Grid with a self-sufficient Solar Energy System:
- HJT (Heterojunction Technology)
High-efficiency HJT Solar Cell integrates technical advantages from both Thin Film Solar Cells and Mono-crystalline Cells.
Features:- High-efficiency HJT Solar Cells (efficiency ≥ 24%) are laminated inside the panel with excellent weak-light performance and superior Power Temperature Coefficient, which enable the foldable solar panel to achieve 5-10% more power.
- Unique Super-wire Connection Technology ensures excellent performance to resist micro cracks. No PID. Even with extreme conditions, the cells in the panel still generate power as long as they are not destructively damaged.
- Laminated with ETFE thin film which is highly-resistant to low and high temperatures, heat, humidity and salt spray. No glass, no frame, ultra-thin and light-weight, its thickness is only 1.5 – 2.5mm while the panel’s weight is a mere 1.5 – 3kg per metre squared, which is only 20-30% of conventional glass modules. We offer various designs of shape and dimensions as per your
- Easy and quick installation with the bonding method. No penetration or mounting. Perfect for commercial and industrial Low-load Bearing roofs, BIPV and Transportation application.
- All-black coloured solar panels can be designed and produced to meet roof surface requirements, and they are most popular for roofs.
- CIGS (Copper Indium Gallium Diselenide)
CIGS is made from Copper Indium Gallium Selenide and is a lightweight, flexible, peel-and-stick application that reaches efficiencies exceeding 16%. It is more stable and can curve to 360 degrees.These modules are ideal for membrane roofs, they can be installed over low-load-capacity roofs that prove challenging for conventional crystalline panels and rack systems. CIGS can also be used in many other applications such as floating solar reservoir covers and large canal waterway solar covers.Features:-
- THIN
Only 1mm thickness. Easy to be joined to your yacht, boat or RV roof, or fixed on your caravans, motorhomes, bicycles and other vehicles for outdoor use. - ETFE COATING
Waterproof, fire-resistant, anti-corrosion. - ROLLED UP TO 360 DEGREE
Easy to install on any object or surface. - SHADE RESISTANT
Bypass diodes on each individual cell reduces power loss and hotspots resistance. - CONVERSION EFFICIENCY
16.5% efficiency. - WORKS IN DIFFUSE LIGHTING
It absorbs light over the widest spectral range, not only within the visible light spectrum, in the same manner. - TAKES UP LESS SPACE IN PACKING
Lighter, thinner films and a bendable characteristic makes it easier to store. - EASY INSTALLATION
Without any bracket or equipment, no penetrations, ballast or racking required. - LIFESPAN
10 years with more than 90% efficiency, 11-25 years with more than 80% efficiency.
- THIN
-
A unique feature of PLUTO 4 PV Controllers is the Modular System feature.
This allows each and every PV Storage Cell to have its own charge control and ensures balanced power generation.
These PV Controllers also share power with each other while remaining as dedicated units to their own appliances.
Our Green Energy Storages are Deep Cycle Type Sun Power Storages that are designed to store solar energy produced during the day, so it can be used at night and on rainy days.
Used in all of our Solar Systems, our Green Energy Storages are Rechargeable, Deep Cycle, Lead Acid, or Nickel Iron (NiFe) with built-in features to be Maintenance FREE.
Unlike Lithium batteries, our Green Energy Storages are made from safer materials that can withstand high temperatures and will last for decades.
Note: NORMAL Batteries are NOT Solar Green Energy Storage. If the PV Storage Cell does NOT have a Deep Cycle life graph, it should NOT be used. Tropical countries, like Malaysia, have an average temperature inside the PV Storage Cell, at least 10 degrees HIGHER than Air Temperature. So, if Air Temperature is 34°C then PV Storage Cell operating temperature is 44°C. If a PV Storage Cell is rated at 25°C then it is NO use in Hot Climate.
Characteristics
- Compatible for use with our PV power generating systems
- Has very good recovery capability because of its excellent charge acceptance and recovery even after a deep discharge cycle
- Cycle life depends on average depth of discharge and recharge cycle controlled by our PV Controller
- Amp hours depend on calculated load requirements and back up reserves required
- Weight – approximately 32kg
- Extended shelf life 18 months
- Useable in any position
- Connecting terminals is of bolt and nut
- Completely Maintenance FREE
- High performance because of low internal resistance
Applications
- Off-Grid Stand-Alone Solar System – DC power
- Rural remote villages, jungle camp sites, estates, plantations, etc.
Low voltage lighting can make a huge difference to the load on the PV Storage Cell.
Low Voltage Lights offer significant benefits for Off-Grid DC power systems. Powered Directly from the PV Storage Cell at 12 or 24V DC, they avoid the need to run an inverter ALL NIGHT just in case someone needs to turn on a light.
This eliminates the inverter losses, as well as the quiescent power draw of the inverter itself.
Efficiency can be optimised by ensuring that lights only run when they need to.
This can be achieved through the use of DC powered PIR motion sensors and/or timer switches, which ensures that you’ll never leave the lights on by mistake. PIR sensors can also be set to only turn on the lights when it’s dark.
Solar DC Water Pumps require no fuel and minimal maintenance.
Solar powered DC Submersible Pumps are used for wells, boreholes, water transfer and irrigation.
For drinking water you will need a borehole over 100 feet deep. 100ft of Earth is enough to filter out any impurities and any bacteria and generally will give you drinkable mineral water without any need for filtering. This means low cost, healthy drinking water is available right under us.
Solar DC Pumps are many times MORE Efficient than AC Pumps and have the advantage that they will work DIRECTLY from Solar PV Panels. Solar DC pumps also work at LOWER voltages and can pump water even at very slow speeds, when it is cloudy, early morning or late evening.
By comparison, AC Pumps will only run at full speed or stop completely if it rains or is cloudy. Giving LESS than 50% of the water collection.
Our Solar DC Pumps contain a drive unit, called an MPPT (Maximum Power Point Tracker) that keeps the pump running from very low sunlight levels right up to hot midday sunshine, giving much more water than any AC Pump could manage. The MPPT comes with every pump and is matched exactly with the pump and solar power system.
NO PV Storage Cells are needed with DC Solar Pumps. Water is pumped by the Sun’s power during the day and fills the water tanks.
Users simply get water from the elevated tanks any time they want by gravity. The cost saving on PV Storage Cell means a very LOW Cost system and free drinking water is feasible.
Solar Submersible Water Pump System For 4″ Wells
Application
- Drinking water supply
- Pond management
- Irrigation
- Pressurising
Characteristics
- Fast, failure-free installation
- Easily serviced
- High reliability & life expectancy
- Short Return of Investment (ROI) cycle
- Lower Total Cost of Ownership (TCO)
FULLY using DC power directly from the PV panel to a Solar DC Aircon unit saves 45% of energy requirement and the cost of an AC Solar Inverter.
Leave your aircon on during the day without paying a single cent!
Description
- 100% Off-Grid
- DC 48V Solar Green Storage powered
- DC driven HIGH Efficiency
- Wide operating temperature (-10℃ to 58℃)